Spectra Logic Spectra 2K Library User Manual page 61

[1] Cleartext passwords Select 1 to either enable or disable cleartext passwords.
[2] NDMP Port Select 2 to set the NDMP port.
2. Press Esc to return to the Configuration Menu.
There will be an asterisk (*) next to the menu option, indicating that an unsaved
change has been made.
3. Select 9 to save the changes.
4. Select y when prompted to reboot.
Note:
You must reboot the library in order for the new NDMP parameters
to take effect.
Chapter 6. Using the Serial Port Interface
61