Spectra Logic Spectra 2K Library User Manual page 35

Caution:
Do not enter or save invalid activation keys. This could disable
existing options.
Options Configuration
This section lists the available licensed options and options not yet licensed. You can
select which licensed option you would like enabled here. Once you have made your
selection, select Change.
Not Licensed This option is not available until purchased and activated with a key code.
Licensed/Disabled The option has been purchased but is currently inactive.
Licensed/Enabled The option is currently licensed and active.
Note:
Ethernet libraries may have only one protocol active at any given
time. Enabling one Ethernet protocol will automatically disable all
other Ethernet protocols that are currently licensed.
Interface
You can configure the library interface using this screen. Use the drop down menu to
select either Fibre Channel or Ethernet, whichever interface applies for your library.
Select GO, and one of the two following screens will display:
Chapter 5. Using the HTTP Interface
35