Spectra Logic Spectra 2K Library User Manual page 15

To Install the Second DCM:
1. Remove the DCM from its protective packaging.
2. Connect power to the library and turn it on. You will see the picker move and
then stop to rest at the bottom of the library. You will then see the rotation of
the DCM, so that the first DCM installed now faces the back of the library.
3. Use the library door key to open the library door.
4. Position the second DCM upright, as you did the first, and firmly press it into its
place. You will hear it snap into place when it fits correctly.
5. Close and lock the library door.
Chapter 2. Installing the Library
15