Spectra Logic Spectra 2K Library User Manual page 31

3. The following page will open:
Figure 5-1 The Login screen.
4. Enter the default User of SU and select Enter; do not enter any password.
If this is the first time using your library, the default super user setting is
username SU with no password.
How to Procedure
If you need to configure your Fibre Channel or Ethernet ports, go to on page 35.
If you would like to enable options (NDMP or Serverless Backup), go to Options
Enablement on page 34.
If you would like to view the library status, go to Status on page 32.
If you would like to configure library protocols, go to The Protocols screen will display
the protocol page for whichever type of licensed protocol you have enabled (iSCSI,
NDMP, or Serverless Backup). on page 38.
If you would like to add or edit users, go to Security on page 43.
Chapter 5. Using the HTTP Interface
31