Otto Bock 2R67 Instructions For Use Manual page 16

4.2 Structure of the safety instructions
CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe
the safety instructions. Consequences are presented as follows if more
than one consequence is possible:
> E.g.: Consequence 1 in case of failure to observe the hazard
> E.g.: Consequence 2 in case of failure to observe the hazard
► This symbol identifies activities/actions that must be observed/carried
out in order to avert the hazard.
4.3 General safety instructions
CAUTION
Non-observance of safety instructions
Falling due to damage or malfunction of the product.
► Follow the safety instructions and the precautions specified in this
accompanying document.
CAUTION
Incorrectly secured screws
Falling due to breakage of load-bearing components caused by screw con­
nections coming loose.
► After completing all settings, the set screws in the tube adapter must
be secured with adhesive before they are tightened to the specified
torque.
► The screws in the clamp bracket must not be secured but only
tightened to the specified torque.
CAUTION
Overloading due to unusual activities
Falling due to breakage of load-bearing components.
► The product was developed for everyday use and must not be used for
unusual activities. These unusual activities include, for example,
extreme sports (free climbing, paragliding, etc.).
► Careful handling of the product and its components not only increases
their service life but, above all, ensures the patient's personal safety!
16 | Ottobock