Aiwa LCX-MT22 Operating Instructions Manual page 34

Changing the order of the groups
You can change the order of groups after completing a recording.
Example
Moving group 3 to the 1st position
En
1, 2, 3,... : Track numbers
(1), (2), (3), ... : Track numbers within a group
A, B, C, ... : Track titles
34
1 Press MD E to select the MD function and
insert an MD.
2 Turn MULTI JOG (press GROUP/PRESET
N,M on the remote control) to select the
group to move in stop mode.
3 Press EDIT so that "Group Edit" is displayed,
and press MULTI JOG (ENTER on the remote
control) within 6 seconds.
4 Press EDIT repeatedly until "G.Move?" is
displayed, and press MULTI JOG within 6
seconds.
5 Turn MULTI JOG or press f,g to select
the desired group number to move the group to.
To cancel, press s.
6 Within 1 minute, press MULTI JOG.
"EDITING" first, and then "Complete" is displayed.
7 Remove the disc.
"WRITING" flashes and the data concerning the contents
of the editing are registered.
Erasing a single track
You can erase a single track on the disc.
1 Press MD E to select the MD function and
insert an MD.
2 Press f or g (numbered buttons on the
remote control) to select the track to erase, or
play back the track.
3 When selecting the track within a group:
1 Press EDIT twice so that "Track Edit" is displayed,
then press MULTI JOG (ENTER on the remote control)
within 6 seconds.
2 Press EDIT repeatedly until "T.Erase?" is displayed,
and press MULTI JOG within 6 seconds.
When playing the track or selecting the track not
belonging to any group:
Press EDIT repeatedly until "T.Erase?" is displayed, and
press MULTI JOG within 6 seconds.
"T.Erase??" is displayed.
To cancel, press s.
4 Within 1 minute, press MULTI JOG.
"EDITING" first, then "WRITING" flashes and the data
concerning the contents of the editing are registered, and
finally "Complete" is displayed.
•When the track is erased during play, press s .
"WRITING" flashes and the data concerning the
contents of the editing are registered.