Aiwa LCX-MT22 Operating Instructions Manual page 32

Changing the order of the tracks
You can change the order of tracks after completing a recording.
In Disc mode, you can move a track anywhere within the disc.
In Group mode, you can move a track anywhere within the
group.
Example
En
Moving the 8th track to the 1st position in the disc mode
1, 2, 3,... : Track numbers
(1), (2), (3), ... : Track numbers within a group
A, B, C, ... : Track titles
32
1 Press MD E to select the MD function and
insert an MD.
2 To move in Disc mode, press DISC/GROUP on
the remote control to turn off "GROUP" in the
display.
To move in Group mode, press DISC/GROUP to
turn on "GROUP", and then turn MULTI JOG
(press GROUP/PRESETN,M on the remote
control) to select the group.
3 Press f or g (numbered buttons on the
remote control) to select the track to move, or
play back the track.
4 When selecting the track within a group:
1 Press EDIT twice so that "Track Edit" is displayed,
then press MULTI JOG (ENTER on the remote control)
within 6 seconds.
2 Press EDIT repeatedly until "T.Move?" is displayed,
and press MULTI JOG within 6 seconds.
When playing the track or selecting the track not
belonging to any group:
Press EDIT repeatedly until "T.Move?" is displayed, and
press MULTI JOG within 6 seconds.
5 Turn MULTI JOG or press f,g to select
the desired track number to move the track to.
To cancel, press s.
6 Within 1 minute, press MULTI JOG.
"EDITING" first, and then "Complete" is displayed.
•When the track is moved during play, press s to stop
play.
7 Remove the disc.
"WRITING" flashes and the data concerning the contents
of the editing are registered.
Moving a track into a group
You can move a track not belonging to any group into the last
part of a specified group.
Example
Moving the 10th track into group 1
1, 2, 3,... : Track numbers
(1), (2), (3), ... : Track numbers within a group
A, B, C, ... : Track titles