Aiwa LCX-MT22 Operating Instructions Manual page 19

To set the auto grouping mode to ON/OFF
1 Press EDIT repeatedly until "Group REC?" is displayed.
2 Within 6 seconds, press MULTI JOG (ENTER on the remote
control).
3 Turn MULTI JOG or press f ,g to display
"Group:ON?". (To set the auto grouping mode to OFF,
turn MULTI JOG to display "Group:OFF?")
4 Press MULTI JOG.
•The Initial setting is ON ("Group:ON?").
•Set auto group mode to OFF ("Group:OFF?") when you
want to create a group by editing after recording.
When playing
There are two modes available:
Disc mode: When the unit is set to the disc mode, it plays
all the tracks within the disc.
For example, when play starts from the first track in the first
group, it continues to the last track in the last group.
Group mode: When the unit is set to the group mode, you
can specify a group in the disc to be played.
For example, if the 2nd group is selected and play is started,
play begins with the first track in the 2nd group and ends with
the last track in the 2nd group.
Play in disc mode
Play in group mode
The above difference between the two modes is applicable
also to search, skip, repeat and random play modes.
To switch between Disc mode and Group mode.
Press DISC/GROUP on the remote control repeatedly so that
"GROUP" is turned off/on in the display
- "GROUP" is turned off : Disc mode
- "GROUP" is turned on : Group mode
About index marks
Index marks allow you to easily locate the desired tracks.
The unit can automatically register index marks while recording
on an MD with Auto index mark register function.
To set Auto index mark register function to ON/OFF
1 Press EDIT repeatedly until "Mark MODE?" is displayed.
2 Within 6 seconds, press MULTI JOG (ENTER on the remote
control).
3 Turn MULTI JOG or press f ,g to display
"Mark:ON?". (To set Auto register function to OFF, turn
MULTI JOG to display "Mark:OFF?")
4 Press MULTI JOG.
•The Initial setting is ON ("Mark:ON?").
Index mark modes
In Auto index mark register function (if you select
"Mark:ON?"), there are two Index mark modes which
depends on the recording source:
AUTO mark mode: An index mark is registered automatically
when a sound signal is input after a blank section lasting more
than 4 seconds.
TIME mark mode: An index mark is registered automatically
at an interval of 5 minutes.
When recording source is CD, tape, AUX or USB, AUTO mark
mode is activated.
When the recording source is radio, TIME mark mode is
activated.
•When recording from a CD in digital, "Mark:ON?" is
automatically selected, AUTO mark mode is activated, and
the index mark information recorded on the CD is copied as
it is. You cannot select "Mark:OFF?".
Note
There may be a case where index marks are not registered
accurately.
Manual mark function
Regardless of the source to be recorded and the button used
to start MD recording, you can record index mark information
anytime you want by pressing MULTI JOG (ENTER on the
remote control).
To prevent accidental erasure of recorded material
Slide the record-protect tab as shown below.
Slide the tab so that it is completely locked.
To protect recorded contents
To record
If a recording is attempted when the tab is set to the protected
position, "Protected" appears on the display. Move the
protect tab to the original position.
En
19