Aiwa LCX-MT22 Operating Instructions Manual page 31

Creating a group
You can create a group using consecutive tracks not belonging
to any group.
1 Press MD E to select the MD function and
insert an MD.
2 If "GROUP" is turned on in the display, press
DISC/GROUP on the remote control to turn it off.
If "GROUP" is turned off, go to step 3.
3 In stop mode, press f or g to select the
first track in the group to create.
4 Press EDIT repeatedly until "Group Set?" is
displayed, and press MULTI JOG (ENTER on the
remote control) within 6 seconds.
5 Confirm the first track number and press MULTI
JOG.
You can change the first track by turning MULTI JOG or
pressing f,g.
6 Turn MULTI JOG or press f,g to select
the last track in the group to create.
To cancel, press s.
7 Within 1 minute, press MULTI JOG.
"EDITING" first, and then "Complete" is displayed.
8 Remove the disc.
"WRITING" flashes and the data concerning the contents
of the editing are registered.
Resetting a group
You can reset a group. The group is erased and all the tracks
within the group are removed from it but remain on the disc,
not belonging to any group.
1 Press MD E to select the MD function and
insert an MD.
2 If "GROUP" is turned on in the display, press
DISC/GROUP on the remote control to turn it off.
If "GROUP" is turned off, go to step 3.
3 In stop mode, turn MULTI JOG (press GROUP/
PRESETN,M on the remote control) to select
the group to reset.
4 Press EDIT so that "Group Edit" is displayed,
and press MULTI JOG (ENTER on the remote
control) within 6 seconds.
5 Press EDIT repeatedly until "G.Reset?" is
displayed, and press MULTI JOG within 6
seconds.
"G.Reset??" is displayed.
To cancel, press s.
6 Within 1 minute, press MULTI JOG.
"EDITING" first, and then "Complete" is displayed.
7 Remove the disc.
"WRITING" flashes and the data concerning the contents
of the editing are registered.
Resetting all groups
You can reset all groups on the disc at one time.
1 Press MD E to select the MD function and
insert an MD.
2 If "GROUP" is turned on in the display, press
DISC/GROUP on the remote control to turn it off.
If "GROUP" is turned off, go to step 3.
3 In stop mode, press EDIT repeatedly until
"G.AllReset?" is displayed, and press MULTI
JOG (ENTER on the remote control) within 6
seconds.
"G.AllRst??" is displayed.
To cancel, press s.
4 Within 1 minute, press MULTI JOG.
"EDITING" first, and then "Complete" is displayed.
5 Remove the disc.
"WRITING" flashes and the data concerning the contents
of the editing are registered.
En
31