Start-Up And Operation - Structural Concepts Impulse Series Operating Manual

START-UP AND OPERATION

For your safety, equipment is furnished with a properly
grounded cord connector. Do not attempt to defeat
the grounded connector.
1. Set-up Counter Top Unit
 Remove case from skid and place on counter in the
position at which the case will reside.
 Note: The following steps must be completed before
this display case may be put in service.
 1. After case is in position, apply a steady bead of
silicone around the base and counter top.
 2. Allow 24 hours for the silicone to dry before using
the case.
 Electrical 120V stub up connections are provided in
the light switch box.
2. Merchandiser Start-Up
 Do not use an extension cord with this appliance.
 Do not operate this equipment with a damaged cord,
plug or outlet.
 Insure the power switch is off.
 Plug cord into a certified 120V electrical outlet with
ground.
3. LED Lights Only
 Lights will come on when case is plugged in and light
switch is turned on.
4. Tissue Dispenser
 Remove tissue dispenser.
 Place a tissue box into the dispenser as shown.
5. Adjustable Front Storage Area Dividers (Optional)
 Dividers are held in place with magnetic tape strips.
 Dividers may be adjusted to reflect varying widths.
 Dividers may be entirely removed from case.
—— Tissue Dispensers ——
Adjustable Front Storage Dividers
(Retained With Magnetic Tape)
5
Light Switch