Overview And Warnings - Structural Concepts Impulse Series Operating Manual

OVERVIEW AND WARNINGS

OVERVIEW
 The Structural Concepts non-refrigerated service
cases are designed to merchandise unpackaged
bakery products at ambient temperatures.
 These cases should be installed and operated
according to the following instructions to ensure
proper performance.
ATTENTION
CONTRACTORS
CAUTION
WARNING
ELECTRICAL
HAZARD
This equipment MUST be installed in compliance with
all applicable NEC, federal, state and local electrical codes.
CAUTION! LAMP REPLACEMENT GUIDELINES
LED lamps reflect specific size, shape and overall design.
Any replacements must meet factory specifications.
Disconnect ALL ELECTRICAL SOURCES before servicing.
CAUTION! GFCI BREAKER USE REQUIREMENT
If N.E.C. (National Electric Code) or your local code
requires GFCI (Ground Fault Circuit Interrupter) protection,
you MUST use a GFCI breaker in lieu of a GFCI receptacle.
CAUTION! POWER CORD AND PLUG MAINTENANCE
Risk of electric shock. If cord or plug becomes damaged,
replace only with cord and plug of same type.
WIRING DIAGRAM FORMAT & LOCATION
 Each case has its own wiring diagram folded & in its own packet.
 Wiring diagram placement may vary; it may be placed near ballast
box, field wiring box, raceway cover, or other related location.
WARNING: This product can expose you to chemicals, including
Urethane (Ethyl Carbamate), which are known to the state of
California to cause cancer and birth defects or other reproductive
harm. For more information go to P65Warnings.ca.gov.
 This unit is designed for the display of products in
ambient store conditions where temperatures and
humidity are maintained at a maximum of 75° F
and 55% relative humidity.
COMPLIANCE
 Performance issues when in violation of
applicable NEC, federal, state and local electrical
codes are not covered by warranty.
COMPLIANCE
WARNING
Risk of electric shock.
3
3