Lcd Menu Tree - CyberPower OL6KRT Installation And Operation Manual

USING THE UPS SYSTEM CONT.
LCD CONTROL PANEL CONT.
LCD SCREEN
UPS is operating in Line Mode.
Line Mode
The UPS is operating normally and protecting the equipment.
UPS is operating in Battery Mode.
Battery Mode A utility power failure has occurred. The UPS is using battery power to power and protect
the equipment.
UPS is operating in Bypass Mode.
Bypass Mode
A fault has been detected and the UPS has transferred the load to utility power.
UPS is operating in Manual Bypass.
Manual Bypass
The UPS has been manually transferred to bypass.
UPS is operating in ECO (Economy) Mode. If bypass power quality is within the
ECO mode setting specifications, the UPS will operate in bypass until input power is
ECO Mode
disqualified per set specifications. When bypass quality is outside of the specified
tolerance the UPS will automatically switch to Line Mode.

LCD MENU TREE

Information
O/P Volt
O/P Freq
I/P Volt
I/P Freq
O/P Load
O/P Amp
O/P Watt
O/P VA
Load Energy
BAT Volt
BAT Cap
BAT Runtime
EBM Number
TEMP
SBM
Rating
MCU Ver
Model Name
Date & Time
Next BATT Change
IP
Subnet Mask
Gateway
MAC
LCD SCREEN - UPS MODES OF OPERATION
Main Menu
©2020 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
UPS MODES DESCRIPTION
Information
Configure
Event Log
Configure
Output Voltage
Sync Freq Window
Bypass V Window
Bypass Condition
ECO Mode
Manual Bypass
UPS Diagnostic
Battery test
Alarm test
Indicator test
Fan test
Audible Alarms
EBM Number
Wiring Fault
NCL Control
Language
Generator Mode
Communication
Dry Relay Set
Converter Mode
Screen Saver
Clear Event Log
Button OFF LOCK
Charger Function
Signal Inputs
Charger Check
With Transformer
Backfeed Check
Rest ReplaceBAT
IP Address
Reset LoadEnergy
LowBat Capacity
LowBat Runtime
Period Battery Test
Event Log
5 Events
20