Lcd Menu Tree - CyberPower OL6KRTMB Installation And Operation Manual

USING THE UPS SYSTEM CONT.
LCD CONTROL PANEL CONT.
LCD SCREEN
UPS is operating in Line Mode.
Line Mode
The UPS is operating and protecting the equipment normally.
UPS is operating in Battery Mode.
Battery Mode A utility power failure has occurred. The UPS is using battery power to work and protect
the equipment.
UPS is operating in Bypass Mode.
Bypass Mode
A fault has been detected and the UPS transfers output to utility power.
UPS is operating in Manual Bypass.
Manual Bypass
The UPS has been manually transferred to bypass for maintenance purposes.
UPS is operating in ECO (Economy) Mode. If Bypass quality is within the ECO mode
ECO Mode setting specifications, the UPS will operate in Bypass until input power is disqualified per
set specifications. At that time the UPS will automatically switch to Line Mode.

LCD MENU TREE

Information
O/P Volt
O/P Freq
I/P Volt
I/P Freq
O/P Load
O/P Amp
O/P Watt
O/P VA
Load Energy
BAT Volt
BAT Cap
BAT Runtime
EBM Number
TEMP
SBM
Rating
MCU Ver
Model Name
Date & Time
Next BATT Change
IP
Subnet Mask
Gateway
MAC
LCD SCREEN - UPS MODES OF OPERATION
Main Menu
Configure
©2020 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
UPS MODES DESCRIPTION
Information
Configure
Event Log
Output Voltage
Sync Freq Window
Bypass V Window
Bypass Condition
ECO Mode
Manual Bypass
UPS Diagnostic
Battery test
Alarm test
Indicator test
Fan test
Audible Alarms
EBM Number
Wiring Fault
NCL Control
Language
Generator Mode
Communication
Dry Relay Set
Converter Mode
Screen Saver
Clear Event Log
Button OFF LOCK
Charger Function
Signal Inputs
Charger Check
With Transformer
Backfeed Check
Rest ReplaceBAT
IP Address
Reset LoadEnergy
Event Log
5 Events
22