Table of Contents
Advertisement
OVERVIEW CONT.
POWER MODULE CONT.
8.
Battery Backup & Surge Protected Outlets
Provides battery backup and surge protection. They ensure power is provided to connected equipment
over a period of time during a power failure.
Critical/Noncritical Load
Allows the creation of load priorities to ensure that battery power reserves are transferred to specified
outlets during a power outage. The unit can be programmed to provide additional runtime for equipment
connected to the "CRITICAL" outlets, while stopping the power supply to equipment connected to
"NONCRITICAL" outlets after a designated period of time.
9.
Serial Port
Serial port provides RS-232 communication between the UPS and a computer. The UPS can trigger a
computer with PowerPanel® Business Edition software installed to shut down during a power outage
through the connection while the computer can monitor the UPS and change its various programmable
settings.
10.
USB Port
USB port provides communication between the UPS and a computer. The UPS can trigger a computer
with PowerPanel® Business Edition software installed to shut down during a power outage through the
connection while the computer can monitor the UPS and change its various programmable settings.
11.
RJ-45/RJ-11 Surge Protected Communication Ports
These ports are used to protect standard RJ-45/RJ-11 based products (ADSL, LAN, telephone/modem
lines) and cabling systems from surges.
12.
Relay Output Connector
Convert UPS signals into real potential-free dry contacts for industrial controls.
13.
Expansion Slot
A network remote management card is pre-installed in the expansion slot.
14.
Extended Battery Module Connector
Connection for additional CyberPower Extended Battery Modules (EBM).
15.
EPO (Emergency Power O ) Connector
Enables an emergency UPS power-o from a remote location.
16.
Backfeed Protection Connector
Prevents power to feedback from the inverter to input power in case of a power failure and a fault in the
bypass circuit.
5
Advertisement
Table of Contents
