Wye Service Connections - ClipperCreek CS 3-Phase Installation Manual

Wye Service Connections

NOTE: Motiv drivetrain vehicles must use a Wye Service
Connection.
Wye transformer service connections require that the NEUTRAL
leg be connected to EARTH GROUND somewhere in the system.
The LINE 1, LINE 2, and LINE 3 phases should all measure
120VAC with respect to EARTH GROUND. See Figure 5.
Figure 5. Wye Service Connections
a Wye Service Connection)
CS 3-Phase Installation Manual
(Motiv drivetrain vehicles must use
Page 15