Welcome Screen And Destination Directory Screens; License Agreement And Start Installation Screens - Texas Instruments ADS8353EVM-PDK User Manual

www.ti.com
5.2.3 Install the ADSxx53EVM-PDK software
The ADS835x EVM V#.#.# software needs to be installed on the PC. This software supports the
ADSxx53EVM-PDK. The user must have Administrator privileges on the PC to be able to install the EVM
software. The following steps list the directions to install the software.
1. Open Windows explorer and find the microSD memory card in the browser as a storage device.
2. Navigate to the ...\ADS835x EVM Vx.x.x\Volume\ folder.
3. Run the installer by right-clicking the setup.exe and selecting Run as Administrator. This action installs
the EVM GUI software and the required simple capture card device driver components.
4. After the installer begins, a welcome screen displays. Click Next to continue.
5. A prompt appears with the destination directory; select the default directory under: ...\Program
Files(x86)\Texas Instruments\ads835xevm\, as shown in
Figure 11. Welcome Screen and Destination Directory Screens
6. One or more software license agreements appear. Select I Accept the License Agreement and click
Next.
7. The Start Installation screen appears. Click Next, as shown in
Figure 12. License Agreement and Start Installation Screens
SBAU210A – June 2014 – Revised August 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated
ADSxx53EVM-PDK Initial Setup
Figure 11.
Figure 12.
ADS8353EVM-PDK and ADS7853EVM-PDK
15