Table of Contents
Advertisement
ADS7042EVM-PDK Initial Setup
5.2.3
Install the ADS7042EVM-PDK Software
The ADS7042 EVM V#.#.# software must be installed on the PC. This software supports the ADS7042-
PDK. Administrator privileges are required to install the EVM software. The following steps list the
directions to install the software:
Step 1. Open Windows Explorer and find the microSD memory card in the browser as a storage
device.
Step 2. Navigate to the ...\ADS7042 EVM Vx.x.x\Volume\ folder.
Step 3. Run the installer by double-clicking the file setup.exe. This action installs the EVM GUI
software and the required and device driver components.
Step 4. After the installer begins, a welcome screen displays. Click Next to continue.
Step 5. A prompt appears with the destination directory; select the default directory
under: ...\Program Files(x86)\Texas Instruments\ADS7042evm\.
Figure 7. Welcome Screen and Destination Directory Screens
Step 6. One or more software license agreements appear. Select I Accept the License Agreement
and click Next.
Step 7. The Start Installation screen appears. Click Next.
Figure 8. License Agreement and Start Installation Screens
Step 8. A progress bar appears; this step takes a few minutes.
Step 9. The progress bar is followed by an Installation Complete notice.
8
ADS7042EVM-PDK
Copyright © 2014, Texas Instruments Incorporated
SBAU234A – October 2014 – Revised November 2014
Submit Documentation Feedback
www.ti.com
Advertisement
Table of Contents
