General Operations; Switching The E-Bike System On/Off - Key-Disp KD218 Manual

Descriptions:
◆Advanced Setting-LCD Luminance adjustment
◆Lighting indicator- when turn on the E-bike lights
◆Mode selection: ODO→ MAX. Speed → AVG.Speed →Ride Time
◆Battery SOC display by percentage info-graphic
◆Digital readout of current speed. Speed unit can be toggled
◆Digital readout of motor power
◆Assist level/Push-assistance- an indication of current assist level which can be increased and
decreased by short pressing "+" or "-" buttons. The push-assistance function can be activated by
long pressing "-" button for more than 2 seconds and symbol

General Operations

◆Switching the E-bike System On/Off

To switch on the E-bike system and provide the power supply to the controller, hold the
On/Off button for 3s.
To switch off E-bike system, hold the On/Off button for 2s. The E-bike system no longer
uses the battery power.
When E-bike system is switched off, the leakage current is less than 1 μA.
■When the E-bike is parked for approx. 10 minutes, the E-bike system switches off
automatically.
Holding "+"button to turn
on the lighting
ON/OFF button; function
confirmation
Holding "-"button to activate
push-assistance
is shown on the screen.
3
Hold both"+"and "-
"button to enter settings
interface