How To Turn On The Lcd - Delta Ultron Series User Manual

NOTE:
1. For BMS/ BMS Setting and EMS/ EMS Setting, the functions will be activated
only after proper installation and settings of the optional accessories have been
completed. For details, refer to 8. Optional Accessories.
1
2. * To display the item(s), you have to log in as Administrator. Please refer to
7.4 Password Entry.
2
* The item(s) will show up only when you use the Delta lithium-ion batteries
and have installed the optional multifunctional communication card (MFC) in
the SMART slot.
3
* To display the item, go to
the upper left corner of the screen.
4
* To display the item, go to
Resistance' from the Module Type list.
5
* To display the item, go to
Module list.
6
* This function is optional. If you need to activate it, please contact Delta
customer service.
3. The LCD screen diagrams in the user manual are for reference only. The actual
display depends on the operation situation.
7.2

How to Turn on the LCD

Step 1
Turn on the Output Switch (Q4).
Step 2
Perform one of the options (a ~ d) below; after that, the LCD will be on.
a. Turn on the Input Switch (Q1); or
b. Turn on the Bypass Switch (Q2); or
c. Turn on the Input Switch (Q1) and Bypass Switch (Q2); or
d. Turn on any external battery cabinet's breaker (Q5) and press any of the battery start
buttons (see Figure 4-1) for 1 second.
Step 3
A short while later, the Main Screen will appear with User Login status and the ON/ OFF
Button ( ).
If the ON/ OFF Button (
first, and then go to
change the setting.
Ultron DPS Series
) does not appear on the screen, please log in as Administrator
→ General Setting → User → On/ Off Button Access to
118
→ BMS and select 'Main' from the list in
→ BMS Setting and select 'Internal
→ BMS Setting and select 'Main' from the