Transmit operation by pressing the button on the Bluetooth
(when the VOX function is OFF)
When the VOX function is OFF, pressing the "Call button"* on the Bluetooth
once will engage the FTM-300DR/DE in transmit, and then a call can be made using the
Bluetooth
headset.
®
Press the "Call button"* again to return the FTM-300DR/DE to receive.
*The button name may differ depending on your Bluetooth
SSM-BT10: When the Multi-Function Key is pressed, a
beep will sound and the FTM-300DR/DE will
continuously transmit.
Press the Multi-Function Key again, a beep
will sound and the FTM-300DR/DE will return
to receive mode.
Hands-free VOX operation with a Bluetooth
When FTM-300DR/DE VOX (automatic voice transmission) function is turned ON, the
Bluetooth
headset can perform hands-free operation and transmit automatically just by
®
talking. Turn the VOX function ON according to "VOX Operation" instructions.
The VOX function is commonly used for the Bluetooth
If you do not use the Bluetooth headset and do not want to use the VOX function with the
microphone, set this to "OFF".
VOX Operation
Using a Bluetooth
ing into the microphone.
The VOX function does not activate with the optional camera-equipped microphone
MH-85A11U.
Setting VOX function
1. Press and hold the [F(SETUP)] key.
2. Rotate the DIAL knob to select [TX/RX], then press
the DIAL knob.
3. Rotate the DIAL knob to select [3 AUDIO], then press
the DIAL knob.
4. Rotate the DIAL knob to select [3 VOX], then press
the DIAL knob.
5. Rotate the DIAL knob to select [VOX], then press the
DIAL knob.
48
headset, you can transmit hands-free automatically, just by speak-
®
®
headset.
®
Press briefly to transmit
headset
®
headset and microphone.
®
TX/RX
1 MODE
2 DIGITAL
3 AUDIO
headset
headset
®
>
>
>