Activate Transmit By Pressing The Button On The Bluetooth; Headset (When The Vox Function Is Off); Hands-Free Vox Operation With A Bluetooth ® Headset - Yaesu FTM-200DR Operating Manual

• When the connection is complete, the [DEVICE] field
will display "Name of the connected Bluetooth
and the [STATUS] field will display "Connected".
• The LED of SSM-BT10 blinks blue. The pairing is
completed.
11. To return to the normal operation screen, press a key other than the power switch or
PTT.
While connected to a Bluetooth
screen, and the received audio and operation
Bluetooth headset.
®
z Disable the Bluetooth
To cancel the Bluetooth
in step 5 above.
z Subsequent Bluetooth
• When the power is turned OFF while the Bluetooth
time the power is turned ON, the same Bluetooth
automatically connected when found.
• If the Bluetooth
power of the same Bluetooth
automatically. If not, turn the FTM-200DR/DE and Bluetooth
ON again.
• To connect to other Bluetooth
headset" on page 55.

Activate Transmit by pressing the button on the Bluetooth

the VOX function is OFF)
When the Multi-Function Key is pressed, a beep will sound
and the FTM-200DR/DE will continuously transmit.
Press the Multi-Function Key again, a beep will sound and
the FTM-200DR/DE will return to receive mode.
Hands-free VOX operation with a Bluetooth
When FTM-200DR/DE VOX (automatic voice transmission) function is turned ON, the
Bluetooth headset can perform hands-free operation and transmit automatically just by
®
talking. Turn the VOX function ON according to "VOX Operation" instructions.
The VOX function is commonly used for the Bluetooth
If you do not use the Bluetooth headset and do not want to use the VOX function with the
microphone, set this to "OFF".
52
headset, the "
®
function
®
operation, just repeat the above procedures, selecting "OFF"
®
headset connection when the power is turned ON
®
headset cannot be found, the "
®
headset is turned
®
headsets, refer to "Connect with another Bluetooth
®
OPTION
headset"
®
107 Bluetooth
Bluetooth
DEVICE
STATUS STATUS
SAVE
" icon lights up on the FTM-200DR/DE
beep will be
headset is connected, the next
®
headset is searched for and
®
" icon blinks on the screen. If the
ON in this state, it will connect
headset OFF and then
®
Press briefly to transmit
headset
®
headset and microphone.
®
ON
SSM-BT10
Connected Connected
OFF
heard from the
®
headset (when
®