M-Grp Allows You To Create Groups Of Memory Channels Regardless Of Frequency; Multi Channel Standby (Mcs) Function - Yaesu FTM-300DR Operating Manual

M-GRP allows you to create groups of
memory channels regardless of frequency.
z Registering memory in M-GRP (memory group)
1. Press the [F(SETUP)] key.
2. Rotate the DIAL knob to select [ENTER FREQUENCY] or [MEMORY CH], then
press the DIAL knob.
3. Rotate the DIAL knob to select [MEMORY CH LIST], then press the DIAL knob.
The memory channel list appears.
4. Rotate the DIAL knob to select the memory channel you want to register in M-GRP.
5. Press and hold the [BAND] key to register that memory channel in M-GRP.
• The memory channel numbers registered in M-GRP are displayed in blue.
• To register another channel, repeat steps 1 and 2.
• To delete the registration, select the memory channel then press and hold the
[BAND] key to cancel the registration.
6. Press the [DISP] key to complete registration.
z Deleting memory from M-GRP (memory group)
To delete a memory channel form M-GRP, perform procedures 1 to 6 as above; proceed
to step 4 and select the memory channel to delete. In step 5, press and hold the [BAND]
key to cancel the registration.

Multi Channel Standby (MCS) Function

Convenient function to automatically watch multiple memory channels registered in the
MAG function group.
Example: Operate MCS function with M-GRP
1. In the memory mode, press the [BAND] key to select M-GRP.
2. Press and hold the [BAND] key.
• Watch all memory channels registered in M-GRP.
• When the MCS is active, "MCS" appears on the display.
• When a signal is received, watch stops on the received memory channel and the
audio can be heard.
• Watch stops on that channel until 5 seconds after reception is completed, so you
can communicate.
• When there is no transmit or receive operation for about 5 seconds, the watch of
the memory channels registered in M-GRP is started again.
3. To cancel the MCS function, press the [BAND] key.
38