Specifications - Yaesu FTM-300DR Operating Manual

Specifications

z General
Frequency Range
Channel Steps
Mode of Emission
Frequency Stability
Antenna Impedance
Supply Voltage
Current Consumption (approx.)
Operating Temperature Range
Case Size (W x H x D)
Weight (approx.)
z Transmitter
RF Power Output
Modulation Type
Maximum Deviation
Spurious Emission
Microphone Impedance
DATA Jack Impedance
72
: TX 144 - 148 MHz or 144 - 146 MHz
430 - 450 MHz or 430 - 440 MHz
(Depends on the transceiver version)
: RX 108 - 137 MHz (AIR Band)
137 - 174 MHz (144 MHz HAM / VHF Band)
174 - 400 MHz (GEN)
400 - 480 MHz (430 MHz HAM / UHF Band)
480 - 999.99 MHz (GEN) (USA Cellular Blocked)
: 5 / 6.25 / 8.33 / 10 / 12.5 / 15 / 20 / 25 / 50 / 100 kHz
(8.33 kHz: only for Air band)
: F1D, F2D, F3E, F7W
: ± 2.5 ppm (-4 °F to +140 °F [-20 °C to +60 °C])
: 50 Ω
: Nominal 13.8 V DC, negative ground
: 0.5 A (Receive)
11 A (50 W TX, 144 MHz)
11 A (50 W TX, 430 MHz)
: -4 °F to +140 °F (-20 °C to +60 °C)
: Radio unit 5.47" x 1.66" x 5.2" (139 x 42 x 132 mm) (w/o Fan)
Controller 5.47" x 2.09" x 0.7" (139 x 53 x 18 mm) (w/o Knob)
: 2.43 lbs (1.1 kg) (with Radio Unit, Controller, Control Cable)
: 50 W / 25 W / 5 W
: F1D, F2D, F3E: Variable Reactance Modulation
F7W: 4FSK (C4FM)
: ± 5 kHz
: At least 60 dB below
: 2 kΩ
: 10 kΩ