Using Setup Menu; Setup Menu Operation - Yaesu FTM-300DR Operating Manual

Using Setup Menu

The Set Mode permits configuring the various functions according to individual operating
needs and preferences.

Setup Menu Operation

1. Press and hold the [F(SETUP)] key.
The SETUP MENU screen will be displayed.
2. Rotate the DIAL knob to select the desired item in the
Setup Menu, then press the DIAL knob.
The Sub-menu screen will be displayed.
3. Rotate the DIAL knob to select the desired item to set.
">" Is displayed at the right end of the submenu that
has the deeper level of menu items.
4. [When there is no deeper level of menu items].
Go step 6.
5. [When there is a deeper level of menu items]
Press the DIAL knob.
The Sub-menu screen will be displayed.
Rotate the DIAL knob to select the desired item to set,
then press the DIAL knob.
6. There are the following two types of operations for
changing the settings depending on the item.
(1) For items whose setting value frame at the top of
the screen is displayed in red, the setting value
changes each time the DIAL knob is pressed.
60
SETUP MENU
DISPLAY
COMPASS
1 TARGET LOCATION
2 COMPASS
3 BAND SCOPE
4 LCD BRIGHTNESS
DISPLAY
COMPASS
1 TARGET LOCATION
2 COMPASS
3 BAND SCOPE
4 LCD BRIGHTNESS