Vox Operation - Yaesu FT5Dr Operating Manual

VOX Operation

The VOX system provides automatic transmit/receive switching based on voice input to
the microphone or Bluetooth
to press the PTT switch in order to transmit, and it is not necessary to use a VOX head-
set in order to utilize VOX operation.
Setting VOX function
1. Press and hold the [F menu] key, and then touch [TX/
RX].
2. Touch [3 AUDIO], and then touch [5 VOX].
3. Press the [F menu] key, and then rotate the DIAL knob
to select "LOW" or "HIGH".
OFF: VOX function OFF
LOW: VOX function ON (VOX Gain Level "LOW")
HIGH: VOX function ON (VOX Gain Level "HIGH")
Whether set to "LOW" or "HIGH", the audio from
®
the Bluetooth
while the Bluetooth
®
Bluetooth function is OFF, the audio from the FT5DR/
DE microphone is automatically transmitted.
• Even if the VOX function is enabled, it will not be in the transmission state while receiving
a signal.
• If the VOX function is ON and the Bluetooth
disabled.
• Please turn OFF the Bluetooth
microphone.
4. Press the PTT switch to return to normal operation.
● Disable the VOX function
To cancel VOX and return to PTT operation, just repeat the above procedures, se-
lecting "OFF" in step 3 above.
Set the VOX (automatic voice transmission) delay time
During transmission with VOX (automatic voice transmission) function, set the time to
stop speaking and return to reception.
1. Press and hold the [F menu] key, and then touch
[TX/RX].
2. Touch [3 AUDIO], and then touch [5 VOX].
3. Rotate the DIAL knob to select [DELAY].
50
®
Headset. With the VOX system enabled, you do not need
headset is automatically transmitted
®
headset is connected. When the
®
function when using the VOX function with the FT5DR/DE
5 VOX
VOX
DELAY :
®
function is OFF, the PTT switch will be
: ON
0.5 sec