Convenience Features; Bluetooth ® Operation - Yaesu FTM-300DR Operating Manual

Convenience Features

®
Bluetooth Operation
The FTM-300DR/DE has built-in Bluetooth
sible using the optional Bluetooth
Bluetooth headset.
®
• The operation of all commercially available Bluetooth
• The Bluetooth
page 6) on the right side of the panel using the optional charging cable SCU-41.
Pairing the Bluetooth
When using the Bluetooth
FTM-300DR/DE must be paired.
This step is only necessary when first connecting the headset.
1. To start the Bluetooth
SSM-BT10: Press and hold the Multi-Function But-
ton for 3 seconds, until the SSM-BT10
LED blinks red/blue alternately.
2. Press and hold the [F(SETUP)] key.
3. Rotate the DIAL knob to select [OPTION], then press
the DIAL knob.
4. Rotate the DIAL knob to select [2 Bluetooth], then
press the DIAL knob.
5. Press the DIAL knob and set [Bluetooth] to "ON".
The setting items are displayed.
6. Rotate the DIAL knob to select [DEVICE], then press
the DIAL knob.
46
headset (SSM-BT10) or a commercially available
®
headset SSM-BT10 can be charged by connecting to the DATA jac (see
®
Headset
®
Headset for the first time, the Bluetooth
®
headset in pairing mode.
®
functionality. Hands-free operation is pos-
®
headsets cannot be guaranteed.
®
Press and hold the Multi Function
Button for 3 seconds to turn ON.
Blinks red
and blue
Headset and the
®
Power ON
OPTION
1 USB CAMERA
2 Bluetooth
3 VOICE MEMORY
OPTION
2 Bluetooth
Bluetooth ON
DEVICE
STATUS STATUS Disconnected Connected
SAVE OFF
>
>
>