Using The Memory; Writting To Memory (There Are Two Ways) - Yaesu FTM-300DR Operating Manual

The FTM-300DR/DE incorporates a Large number of memory channels that can register
the operating frequency, communication mode, and other operational information.
• 999 Memory Channels
• 5 Home Channels
• 50 pairs PMS Memory Channels
The operating frequency and other operational information can be registered to each
regular memory channel, home channel, or PMS memory channel:
• Operating frequency
• Transmitter output
• TX/RX DG-ID
• Memory channel skip information
Back up the stored contents to a microSD memory card. For details on backing up to a microSD
card.

Writting to memory (There are two ways)

(1) Press [V/M] key to write
1. Set the frequency to write to memory.
2. Press and hold the [V/M(MW)] key.
The memory channel list appears.
The lowest available number is selected. To select
another channel, rotate the DIAL knob to select the
memory channel number to be written.
• Rotate the lower DIAL knob to fast-forward in
10-channel steps.
For already written memory channels, the writing
frequency is displayed.
3. Press and hold the [V/M (MW)] key or press the DIAL
knob to display a popup. Make sure that [WRITE] is
highlighted and press the DIAL knob.
If you attempt to register a frequency to a memory
channel that already contains frequency data, "OVER-
WRITE?" will appear on the screen. Rotate the DIAL
knob to select [OK], then press the DIAL knob to
overwrite the memory channel.
4. The memory is stored, and the screen returns to the
previous screen.
• Communication Mode
• Memory tag
• Tone information
NOTE

Using the Memory

• Frequency Step
• Repeater Shift
• DCS information
MEMORY CH LIST
001 145.000
002
.
003
.
004
.
MEMORY CH LIST
001 145.000
002
.
003
.
004
.
ｰ ｰ ｰ ｰ
ｰ ｰ ｰ ｰ
ｰ ｰ ｰ ｰ
ｰ ｰ ｰ ｰ
ｰ ｰ ｰ ｰ
ｰ ｰ ｰ ｰ
33