Bluetooth Connection - Javad TRIUMPH-3 Start Manual

TRIUMPH-3 START GUIDE
MANAGING AND OPERATING RECEIVER USING IPAD/IPHONE
Connection to TRIUMPH-3
The TRIUMPH-3 receiver has built-in
Bluetooth and WiFi modules, and you can
use both interfaces to connect to the iPad/
iPhone.
To start the connection write the TCP/FTP
password. To find the password, perform
the following steps:
1. Start the NetView&Modem on your PC,
connect to the TRIUMPH-3 receiver using
USB or Bluetooth, then click Network-
ing-Server.
Note: To connect your TRIUMPH-3 to PC,
use the USB cable.
Figure 1. Server tab parameters
2. Save the password to have it near at
hand during the first connection.

Bluetooth connection

1. Press the Bluetooth button on the
TRIUMPH-3 front panel. The Bluetooth LED
will be red, and that means the Bluetooth
module is powered and disconnected.
2. Start the JMT for iPhone/iPad software
and select "Connect to" command from
5