Javad TRIUMPH-3 Start Manual page 12

MANAGING AND OPERATING THE RECEIVER USING THE
Connection to TRIUMPH-3
1. Run the JAVAD Post.Proc for Android ap-
plication (available at Google Play) and se-
lect the preferred connection type on the
first page. Android-based devices can be
connected to TRIUMPH-3 using:
• Bluetooth direct connection;
• WiFi (mobile access point)
• Ethernet (remote connection).
Figure 1. Bluetooth connection to TRIUMPH-3
TRIUMPH-3 START GUIDE
ANDROID-BASED DEVICE
2. If the Bluetooth connection is select-
ed, the application starts searching for
available devices. Select TRIUMPH-3 in the
blue list. The Bluetooth PIN-code will be
required.
After the pairing, TRIUMPH-3 will be always
in this list (till manual disconnection) with-
out new search.
3. If the WiFi connection is selected, con-
figure your Android device as Mobile Ac-
cess Point (aka HotSpot).
Note: This procedure may differ depend-
ing on device.
Connect to TRIUMPH-3 initially using Blue-
tooth and then tap the "Reconnect to WiFi"
button. Select the WiFi (with MobileAP) ra-
dio button on the Connection page to try
to find TRIUMPH-3 connected via WiFi. Af-
ter that you can connect to TRIUMPH-3 by
selecting it from the green list. Login and
password to access TRIUMPH-3 will be re-
quired.
4. The Ethernet connection requests the
manual entering of the IP address, port,
and login/password setup. Tap "Connect".
12