Table of Contents
Advertisement
Steuergerät montieren
WARNING!
An electric shock can be fatal.
Work that is carried out incorrectly may result in serious injury or damage to property.
► Mounting the drive plate to the robot only together with the insulating plate included in
the wire feeders scope of delivery.
Attaching the drive plate
(1) (2)
CAUTION!
Danger of injury due to devices falling.
Work that is carried out incorrectly may re-
sult in serious injury or damage to property.
► Check the seating of the screw connec-
tions between the controller and the
controller bracket.
Insert the controller into the controller
2
bracket so that the „Gas check" (1) and
„Inching in" (2) keys are pointing up-
wards.
Attach the controller to the controller
3
bracket using 4 Extrude-Tite M5 x 10
screws.
IMPORTANT! To allow the drive plate to be
set up at a later stage, do not tighten the
screws that attach the drive plate to the ro-
bot.
Use two hexagonal socket head
4
screws M6 x 25 to attach the drive pla-
te and bracket to the robot: Choose an
assembly position as required for the
robot
27
Advertisement
Table of Contents
