Fisher & Paykel WA1068G1 Manual

Caring for your washer

When you have finished using your

washer

• Turn off the taps to prevent the chance of flooding

should a hose burst.

• Turn off the power at the wall.

If you always wash with cold water, we recommend

that a WARM or HOT wash be used at regular

intervals, eg every 5th wash should be at least a

warm one.

Ensure the power is turned off at the wall before cleaning your washer.

• Clean the surfaces of your washer with a soft damp cloth only and wipe dry. Do not use scouring or spray

cleaners as they can damage the paint, plastic and panel surfaces.

• Clean the fabric softener dispenser after each cycle using warm soapy water.

• To remove the agitator for cleaning, unscrew the nut down the centre of the agitator by turning anti-clockwise.

https://producthelp.fisherpaykel.com/au/Wash/Top_Loaders/WashSmart/WA1068G1/User_Guide_WA1068G1/16_Caring_for...

Updated: Wed, 12 Apr 2023 04:57:47 GMT

Table of Contents

Do you have a question about the WA1068G1 and is the answer not in the manual?

Page 1 • Clean the fabric softener dispenser after each cycle using warm soapy water. • To remove the agitator for cleaning, unscrew the nut down the centre of the agitator by turning anti-clockwise. https://producthelp.fisherpaykel.com/au/Wash/Top_Loaders/WashSmart/WA1068G1/User_Guide_WA1068G1/16_Caring_for… Updated: Wed, 12 Apr 2023 04:57:47 GMT...
Page 2 Your washer has a self-cleaning lint system. The machine automatically separates the lint from the wash water, traps the lint between the inner and outer bowls and flushes it out at the end of the wash. https://producthelp.fisherpaykel.com/au/Wash/Top_Loaders/WashSmart/WA1068G1/User_Guide_WA1068G1/16_Caring_for… Updated: Wed, 12 Apr 2023 04:57:47 GMT...