Accessories And Spare Parts - Fisher & Paykel WA1068G1 Installation Instructions Manual

1. Touch POWER to activate your washer.
2. Touch both the KEYLOCK and OPTIONS buttons at the same time, and hold for two seconds.
3. Touch START / PAUSE to start the installation test cycle.
4. The machine will beep to signal the end of the installation test cycle. Any faults will be displayed on the screen
(refer to the back of this user guide to help identify faults). If you need further assistance, please contact a
Fisher & Paykel Customer Care Representative. Refer to page 38 for contact details.
If there are no faults found, the washer will automatically turn off at the end of the
installation test cycle.
Clothes washer safety
• This clothes washer is not intended for use by children and persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Supervise children at all times to ensure they do not play with the washer.
Electrical Shock Hazard
• If you are using an extension cord or a portable electrical outlet device (eg multi-socket outlet
box), ensure that it is positioned so that it does not come into contact with water or moisture.
• Failure to do so may result in death or electrical shock.
Available from your Fisher & Paykel Dealer or a Fisher & Paykel Authorised Repairer.
Inlet Valve
Cap
Hose Inlet
Long (2m)
Hose Inlet
Large Bore
https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/WashSmart/WA1068G1/User_Guide_WA1068G1/02_Installation...

Accessories and Spare Parts

Part No. 388491P
Part No. 422680P
Part No. 426123P
Updated: Sat, 30 May 2020 19:03:41 GMT
Powered by
7