Labconco FreeZone 70020 Series User Manual page 27

Chapter 4: Lyo-Works Operating System
 Start/Stop – Use this button to start or stop a program. The wording on
this button will change from "Start" to "Stop" depending on whether or not
a program is currently running.
A DRYING ACCESSORY MUST BE ATTACHED TO THE FREEZE

DRYER (VIA THE COMMUNICATION CABLE) TO RUN A
PROGRAM. IF NO DRYING ACCESSORY IS ATTACHED TO THE
FREEZE DRYER, THE START BUTTON WILL BE INACTIVE.
 Edit/View – Use this button to Edit or View the parameters of a saved
program.
 Copy – Use this button to Copy a selected program. The default name will
be "Copy of Program Name". The program name can be edited as desired.
 Delete – Use this button to delete a saved program from the list.
When a program is currently in progress, a "running man" icon will appear to the
left side of the program name. If the running program is selected (highlighted), the
"Stop" button will be active, and the "Delete" button will be inactive.
"New" program
When the "New" button is selected, the following screen will be displayed.
22 Product Service 816-333-8811 or 1-800-522-7658
Original instructions