How Do I Enable The Pulse Dialing Function - Huawei eSpace IAD Troubleshooting Manual

eSpace IAD
Troubleshooting



4.2.10 How do I enable the pulse dialing function

Q: How do I enable the pulse dialing function?
A: You can do as follows:


Issue 02 (2012-02-29)
Use the web management system. For details, see Configuration > Manual
Configuration (Web) > Advanced Configuration > Setting the Fax Parameters in the
eSpce IAD Product Documentation.
Use the CLI. For details, see Configuration > Manual Configuration (CLI) >
Advanced Configuration > Setting the Fax Parameters in the eSpce IAD Product
Documentation.
IAD101H/102H/104H supports only the CLI mode.
IAD101H/102H/104H
Log in to the CLI, and run the enable, configure terminal, and advanced commands to
enter the advanced mode. Then run the pstnport attribute set 0 enable command. If
port 0 needs to be connected to the DTMF phone, run the pstnport attribute set 0
disable command to disable the pulse dialing function.
IAD208E(M), IAD132E(T) and IAD1224
Log in to the web management system, and choose Advanced Configuration > PSTN
Port Attribute Configuration > User Port Attribute. The page for setting the PSTN
port attributes is displayed. Select a port and click Modify. On the page that is displayed,
enable the pulse dialing function and click OK.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 FA Qs
104