How Do I View The Elabel Of The Iad; Operation-Related Faqs; How Do I Log In To The Iad Management System; How Do I Log In To The Iad If I Forget The Password - Huawei eSpace IAD Troubleshooting Manual

eSpace IAD
Troubleshooting

4.1.7 How do I view the elabel of the IAD

Q: How do I view the elabel of the IAD?
A: You can view the MAC address in the following ways:



4.2 Operation-Related FAQs

This topic provides operation-related FAQs, including how to resolve problems that users
encounter in product configuration and information query.

4.2.1 How do I log in to the IAD management system

Q: How do I log in to the IAD management system?
A: You can log in to the IAD management system in the following ways:



4.2.2 How Do I Log In to the IAD If I Forget the Password

Q: How do I log in to the IAD if I forget the password?
A: You can log in to the IAD in either of the following ways when you forget the password:

Issue 02 (2012-02-29)
IAD101/102/104H, IAD208E(M) and IAD132E(T)
Log in to the CLI, and run the enable and configure terminal commands in sequence to
enter the global configuration mode. Then run the display elabel command.
IAD1224
Log in to the CLI, and run the enable and configure terminal commands in sequence to
enter the global configuration mode. Then run the following commands:
− For the CVP, run the display elabel cvp command.
− For the backboard, run the display elabel backboard command.
−
For the ASI or OSU board, run the display elabel pots command.
IAD101/102/104H
Use a network cable to connect a PC to the LAN port on the IAD, enter telnet
192.168.100.1 in the Run dialog box, and enter the user name root and password
(admin by default).
IAD208E(M), IAD132E(T) and IAD1224
You can log in to the IAD management system in the following modes:
− Web mode: Open Internet Explorer, enter http://IP address of the IAD
(192.168.100.1 by default) in the address box, and enter the user name root and
password (admin by default).
−
Telnet mode: Enter telnet IP address of the IAD (192.168.100.1 by default) in the
Run dialog box, and enter the user name root and password (admin by default).
− Local serial port mode: For details, see the eSpace IAD Product Documentation.
Log in to the IAD using Telnet: Enter the user name system and password login on the
Telnet login page to log in to the IAD. Manually restore factory settings in the global
configuration mode, and restart the IAD. When the IAD restarts, use the default IP
address 192.168.100.1, user name root, and password admin to log in to the IAD.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 FA Qs
101