ZyXEL Communications P-334WT Support Notes page 87

Hide thumbs Also See for P-334WT:
Table of Contents

Advertisement

9. 0
When you have finished the above settings, you can ping to the remote Win9x client from WinNT. This ping
command is used to demonstrate that remote the Win9x can be reached across the Internet. If the Internet
connection between two LANs is achive, you can place a VPN call from the remote Win9x client.
For example:
C:\ping 203.66.113.2
When a dial-up connection to ISP is established, a default gateway is assigned to the router traffic through that
connection. Therefore, the output below shows the default gateway of the Win95 client after the dial-up connection
has been established.
Before making a VPN connection from the Win9x client to the NT server, you need to know the exact Internet IP
address that the ISP assigns to Prestige 324 router in SUA mode and enter this IP address in the VPN dial-up
dialog box. You can check this Internet IP address from PNC Monitor or SMT Menu 24.1. If the Internet IP
address is a fixed IP address provided by ISP in SUA mode, then you can always use this IP address for reaching
the VPN server.
In the following example, the IP address '140.113.1.225' is dynamically assigned by ISP. You must enter this IP
address in the 'VPN Server' dialog box for reaching the PPTP server. After the VPN link is established, you can
start the network protocol application such as IP, IPX and NetBEUI.
Menu 15 - SUA Server Setup
Port #
------
---------------
1.Default
0.0.0.0
2. 1723
192.168.1.10
3. 0
0.0.0.0
4. 0
0.0.0.0
5. 0
0.0.0.0
6. 0
0.0.0.0
7. 0
0.0.0.0
8. 0
0.0.0.0
0.0.0.0
IP
Address

Advertisement

Table of Contents
loading

Table of Contents