ZyXEL Communications P-334WT Support Notes page 168

3. Troubleshooting
Q: How do we know the above tunnel works?
A: If the connection between PC 1 and PC 2 is ok, we know the tunnel works.
Please try to ping from PC 1 to PC 2 (or PC 2 to PC 1). If PC 1 and PC 2 can ping to each other, it means that the IPSec tunnel has
been established successfully. If the ping fail, there are two methods to troubleshoot IPSec in P-334WT.
Menu 27.2, SA Monitor
Through menu 27.2, you can monitor every IPSec connections running in P-334WT presently. The second column of each entry
indicates the IPSec rule name. So, if you can't see the name of your IPSec rule, it means that the SA establishment fails. Please go
back Menu 27 to check your settings.
#
-- -------------------------------------------------- ----------
-------------------------
1 ZyWALL ca24f1eb6616b7c4 732c211ae9b01a0f
2
3
4
5
6
7
8
9
10
Menu 27.2 - SA Monitor
Name
Select Command= Refresh
Select Connection= N/A
Press ENTER to Confirm or ESC to Cancel:
Encap. IPSec ALgorithm
Tunnel ESP DES-SHA1