ZyXEL Communications P-334WT Support Notes page 12

19. What to do when when Prestige response nothing via console ?
When Prestige responses nothing on your terminal (e.g. embedded HyperTerminal), please try following
methods
1. Make sure the CON/AUX (which is close to the power jet) switch of P-334WT is set to CON, not
AUX.
2. Please check whether RS-232 cable is well connected between Prestige and your computer.
3. Please try any baud rate between 9600 bps to 115200 bps in case the baud has been changed.
20. What network interface does the new Prestige series support?
The new Prestige series support auto MDX/MDIX 10/100M Ethernet LAN/WAN port to connect to the
computer on LAN and 10/100M Ethernet to connect to the external cable or ADSL modem on WAN.
Advanced FAQ
1. How does the Prestige support TFTP?
In addition to the direct console port connection, the Prestige supports the uploading/download of the
firmware and configuration file using TFTP (Trivial File Transfer Protocol) over LAN.
2. Can the Prestige support TFTP over WAN?
Although TFTP should work over WAN as well, it is not recommended because of the potential data
corruption problems.
3. How can I upload data to outside Internet over the one-way cable?
A workaround is to use an alternate path for your upstream path, such as a dialup connection to an
Internet service provider. So, if you can find another way to get your upstream packets to the Internet
you will still be able to receive downstream packets via Prestige.
4. How fast can the data go?
The speed of the cable modem is only one part of the equation. There are a combination of factors