ZyXEL Communications P-334WT Support Notes page 166

2. In this example, we presume that P-334WT's model name is P-334WT. And since it's P-334WT, so only 1 PC can use the tunnel.
3. In this example, we presume that ZyWALL's model name is ZyWALL10W.
1. Setup P-334WT
1. Using a web browser, login P-334WT by giving the LAN IP address of P-334WT in URL field. Default LAN IP is
192.168.1.1, default password to login web configurator is 1234.
2. Click Advanced, and click VPN tab on the left.
3. On the SUMMARY menu, Select a policy to edit by clicking Edit.
4. On the Rule-Setup menu, check Active check box and give a name to this policy.
5. Local Address is PC1's IP address.
6. Remote Address Start is
7. Destination IP Address Start and Destination IP Address End are PC 2 IP in this example. (the secure remote host)
8. My IP Addr is the WAN IP of P-334WT.
9. Secure Gateway IP Addr is the remote secure gateway IP, that is ZyWALL WAN IP in this example.
10. Select Encapsulation Mode to Tunnel.
11. Check the ESP check box. (AH can not be used in SUA/NAT case)
12. Select Encryption Algorithm to DES and Authentication Algorithm to MD5, as we configured in ZyWALL.
13. Enter the key string 12345678 in the Preshared Key text box, and click Apply.
See the screen shot: