ZyXEL Communications P-334WT Support Notes page 71

When you choose Edit, Insert Before or Save Set in the previous field
Select Rule the cursor jumps to this field to allow you to select the rule to apply the
action in question.
Note: Save Set in the Action field means to save the whole set. You must do this if you make any
changes to the set-including deleting a rule. No changes to the set take place until this action is taken. Be
careful when ordering your rules as each rule is executed in turn beginning from the first rule.
Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu
15.1.1.1-Address Mapping Rule in which you can edit an individual rule and configure the Type, Local
and Global Start/End IPs displayed in Menu 15.1.1.
The following table describes the fields in this screen.
Field Description
Press [SPACEBAR] to toggle through a total of 5 types.
Type These are the mapping types discussed above plus a server
type. Some examples follow to clarify these a little more.
Start This is the starting local IP address (ILA)
Local
Menu 15.1.1.1 -
Type: One-to-One
Local IP:
Start= 0.0.0.0
End = N/A
Global IP:
Start= 0.0.0.0
End = N/A
Press ENTER to Confirm or ESC to Cancel:
- Rule 1
1
Option/Example
One-to-One
Many-to-One
Many-to-Many Overload
Many-to-Many No
Overload
Server
0.0.0.0