ZyXEL Communications P-334WT Support Notes page 261

pr
IPSec Related Command
ipsec
debug
ipsec_log_disp
route
<iface> query
<iface> rsptime [time]
<iface> start
<iface> stop
<iface> ttl <threshold>
<iface> v1compat [on|off]
robustness <num>
status
Command
<1|0>
lan <on|off>
send query on iface
set igmp response time
turn on of igmp on iface
turn off of igmp on iface
set ttl threshold
turn on/off v1compat on iface
set igmp robustness variable
dump igmp status
Description
turn on|off trace for IPsec debug
information
show IPSec log, same as menu 27.3
After a packet is IPSec processed and
will be sent to LAN side, this switch
is to control if this packet can be
applied IPSec again.
Remark: Command available since
3.50(WA.3)
Home