ZyXEL Communications P-334WT Support Notes page 252

pnc <yes|no>
log <yes|no>
rule <rule#> permit <forward|block> Edit whether a packet is dropped or
active <yes|no>
protocol <0~255>
log <none|match|not-
match|both>
alert <yes|no>
srcaddr-single <ip
address>
srcaddr-subnet <ip
address> <subnet mask>
srcaddr-range <start ip
address> <end ip
address>
destaddr-single <ip
address>
destaddr-subnet <ip
address> <subnet mask>
PNC is allowed when 'yes' is set even
there is a rule to block PNC
Switch on/off sending the log for
matching the default permit
allowed when it matches this rule
Edit whether a rule is enabled or not
Edit the protocol number for a rule.
1=ICMP, 6=TCP, 17=UDP...
Sending a log for a rule when the packet
none|matches|not match|both the rule
Activate or deactivate the notification
when a DoS attack occurs or there is a
violation of any alert settings. In case of
such instances, the function will send an
email to the SMTP destination address
and log an alert.
Select and edit a source address of a
packet which complies to this rule
Select and edit a source address and
subnet mask if a packet which complies
to this rule.
Select and edit a source address range of
a packet which complies to this rule.
Select and edit a destination address of a
packet which complies to this rule
Select and edit a destination address and
subnet mask if a packet which complies
to this rule.