ZyXEL Communications P-334WT Support Notes page 153

ftp: 924512 bytes sent in 4.83Seconds 191.41Kbytes/sec.
ftp>
Here, the 'p312.bin' is the local file and 'ras' is the remote file that will be saved in the Prestige.
The Prestige reboots automatically after the uploading is finished.
2. Using FTP client software
Rename the local firmware and configuration files to 'ras' and 'rom-0', because we can not
Step 1
specify the remote file name in the FTP client software.
Use FTP client from your workstation to connect to the Prestige by entering the IP address of
Step 2
the Prestige.
Step 3 Enter the SMT password as the FTP login password. The default is '1234'.
Step
Press 'OK' key to ignore the username, because the Prestige does not check the username.
4
Example:
1. Connect to the Prestige by entering the Prestige's IP and SMT password in the FTP software. Set the
transfer type to 'Auto-Detect' or 'Binary'.