ZyXEL Communications P-334WT Support Notes page 265

lcPortEnd <port>
rmAddrType <0:single | 1:range | 2:subnet> Set remote address type
rmAddrStart <IP>
rmAddrEndMask <IP>
rmPortStart <port>
rmPortEnd <port>
antiReplay <Yes | No>
keyManage <0:IKE | 1:Manual>
ike negotiationMode <0:Main | 1:
Aggressive>
preShareKey <string>
p1EncryAlgo <0:DES |
1:3DES>
p1AuthAlgo <0:MD5 | 1:
SHA1>
p1SaLifeTime <seconds>
p1KeyGroup <0:DH1 | 1:
DH2>
activeProtocol <0:AH | 1:
ESP>
p2EncryAlgo <0:Null | 1:DES
| 2:3DES>
p2AuthAlgo <0:MD5 | 1:
SHA1>
Set local end port
Set remote start address
Set remote end address or mask
Set remote start port
Set remote end port
Set anitreplay or not
Set key manage
Set negotiation mode in phase 1 in
IKE
Set pre shared key in phase 1 in IKE
Set encryption algorithm in phase 1
in IKE
Set authentication algorithm in phase
1 in IKE
Set sa life time in phase 1 in IKE
Set key group in phase 1 in IKE
Set active protocol in phase 2 in IKE
Set encryption algorithm in phase 2
in IKE
Set authentication algorithm in phase
2 in IKE