ZyXEL Communications P-334WT Support Notes page 57

Key Settings for making a PPPoE connection:
Option
Encapsulation
My Login
My Password
Idle Timeout
IP Address Assignment
Network Address Translation
2. Configure 'Server Name' for the PPPoE connection in Menu 11.1
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation=
Service Type= N/A
My Login= ras@pppoellc
My Password= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA-Only
Press ENTER to Confirm or ESC to Cancel:
Description
Set 'PPPoE' as the encapsulation.
Enter the login name that the ISP provided.
Enter the password that the ISP provided.
This value specifies the time in seconds that can elapse before the Prestige
automatically disconnects the PPPoE connection.
Choose 'Dynamic' if the ISP provides the IP dynamically, otherwise
choose 'Static' and enter the static IP in the 'IP Address' field.
Set this field to 'SUA Only' if you want all clients share one IP to Internet.
Set to 'Full Feature' if there are multiple IP addresses given by ISP and
can assigned to your clients.
Set to 'None' if you clients use Internet IP addresses and thus do not need
NAT function.
PPPoE