ZyXEL Communications P-334WT Support Notes page 264

keep_alive <rule #>
load <rule #>
save
config netbios
name
name
keeyAlive
lcIdType
lcIdContent
myIpAddr
peerIdType
peerIdContent
secureGwAddr
protocol
lcAddrType
lcAddrStart
lcAddrEndMask
lcPortStart
<on|off>
active <on|off>
group <group index1, group
index2...>
<string>
<string>
<Yes| No>
<0:IP | 1:DNS | 2:Email>
<string>
<IP address>
<0:IP | 1:DNS | 2:Email>
<string>
<IP address | Domain name>
<1:ICMP | 6:TCP | 17:UDP>
<0:single | 1:range | 2:subnet> Set local address type
<IP>
<IP>
<port>
Set ipsec keep_alive flag
Load ipsec rule
Save ipsec rules
Set netbios active flag
Set netbios group
Set rule name
Set rule name
Set keep alive or not
Set local ID type
Set local ID content
Set my IP address
Set peer ID type
Set peer ID content
Set secure gateway address or
domain name
Set protocol
Set local start address
Set local end address or mask
Set local start port