Operation
Sound-Active Programs
To run the EZLink Par Q4BT ILS with a sound-active program, follow the instructions below.
1. Press <MENU> repeatedly until Snd shows on the display.
2. Use <UP> or <DOWN> to set the Sound-Active program, from Snd1 to Snd5.
3. Press <ENTER>.
Sound Sensitivity
To set the sound sensitivity on the EZLink Par Q4BT ILS, do the following:
1. Press <MENU> repeatedly until SEnS shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from u 0–100.
3. Press <ENTER>.
Custom Color Mixing
To custom mix a static color, do the following:
1. Press <MENU> repeatedly until u-- shows on the display.
2. Press <ENTER> and one of the following will show on display.
•
r._ _ _ (red)
•
G._ _ _ (green)
•
b._ _ _ (blue)
•
A._ _ _ (amber)
•
S._ _ _ (Strobe)
3. Press <ENTER> to cycle through the color settings.
4. When the desired color shows on the display, use <UP> or <DOWN> to increase or decrease the
color value, from 000–255 (red, green, blue, amber) or 000–100 (Strobe).
5. Repeat steps 3 and 4 until the product outputs as desired.
EZLink Par Q4BT ILS User Manual Rev. 2
12