Table of Contents
Advertisement
Preset Color Mode
To run the EVE P-160 RGBW on a static color, follow the instructions below:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select a static color, from C 1–28:
C 1 (red)
C 2 (green)
C 3 (blue)
C 4 (cyan)
C 5 (magenta)
C 6 (yellow)
C 7 (lilac)
C 8 (hot pink)
C 9 (orange)
C 10 (azure)
C 11 (deep pink)
C 12 (lime green)
C 13 (lavender)
C 14 (pink)
C 15 (tangerine)
C 16 (dark bastard amber)
C 17 (sea-foam green)
C 18 (flamingo pink)
C 19 (2700K)
C 20 (3000K)
C 21 (3200K)
C 22 (3500K)
C 23 (4000K)
C 24 (4500K)
C 25 (5000K)
C 26 (5500K)
C 27 (6000K)
C 28 (6500K)
4.
Press <ENTER>.
Custom Color Mixing
To custom mix a static color, do the following:
1.
Press <MENU> repeatedly until u-- shows on the display.
2.
Press <ENTER> and one of the following will show on the display:
•
r_ _ _ (red)
•
g_ _ _ (green)
•
b_ _ _ (blue)
•
W_ _ _ (white)
3.
Press <ENTER> to cycle through the colors.
4.
Use <UP> or <DOWN> to increase or decrease the value of the selected color, from 0–255.
5.
Repeat steps 3 and 4 until the color is set as desired.
Dimmer Speed Mode
To change dimmer speed on the EVE P-160 RGBW, follow the instructions below.
1.
Press <MENU> repeatedly until dIM shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select:
•
dIM1 (fast)
•
dIM2 (medium)
•
dIM3 (slow)
or
•
OFF.
4.
Press <ENTER>.
Page 10 of 15
EVE P-160 RGBW User Manual Rev. 1
Operation
Advertisement
Table of Contents
