Extreme Networks ExtremeWireless AP3935i Installation Manual page 20

•
Determining the Antenna Model
•
Configuring Radio RF Port
•
Configuring Radio Channel
•
Configuring Radio Transmit (Tx) Power
Determining the Antenna Model
The professional installer needs to determine antenna models and the number of antenna ports for that
model. The number of ports can be determined from visual inspection of the antenna or from the
antenna model. For information about antenna models, see
AP3935e on page 33.
Configuring Radio RF Port
The professional installer configures Radio RF ports where antenna ports will be connected.
To configure radio RF ports through the ExtremeWireless Assistant:
1 Log into the Wireless Assistant.
2 From the top menu, click AP.
The Wireless AP screen is displayed.
ExtremeWireless™ AP3935i & AP3935e Installation Guide
on page 20
on page 20
on page 23
on page 24
Table 8: Certified External Antennas for
Installation
20