Extreme Networks ExtremeWireless AP3935i Installation Manual page 13

Reset Switch
The AP3935 provides a Reset Switch to reset or restore factory default configurations. Use a pointed
object to press the switch button through the hole. (See
you hold down the button for less than five seconds, the AP performs a software interrupt, causing it to
drop all connections and reset. If you hold the button down for five seconds or more, any configuration
changes are removed, and the factory default configuration restores to the AP.
Kensington Lock Slot
There is a slot for a Kensington lock
instructions on use of the lock.
Figure 5: Kensington Lock slot
ExtremeWireless™ AP3935i & AP3935e Installation Guide
Figure 3: AP3935 Bottom View
on the side of the AP. See the Kensington lock documentation for
Introduction
on page 11.) If
13